News

June 2020

Some Suggestions On How To Choice Display Lights For Jewelry Stores

One of the most important aspects of jewelry store design is display lighting. Interior designers and lighting manufacturers say that, however, jewelry store owners often view lighting as a cost rather than a tool to promote sales.

People cannot think of display lighting as an expense, but as a way to increase sales and profitability, you can have the most beautiful shops and the best jewelry, but in the end you want to be able to display your jewelry with the best light At the same time, it will bring great attraction to your guests and better increase your company’s benefit.

 

The most important part of the store is the jewelry display counter. Jewelers as a whole know more about lighting than in the past, and what lighting can do for them. This is an advantage that makes your store more attractive than guys on the street. ”

 

Designers and Shenzhen Awelled(Jewellery lighting manufacuturer) recommend that cabinet lighting comes from above and inside the cabinet.

 

The best display lighting comes from above and inside, with special emphasis on the lighting above. The lights in the display case are basically shadow lights. The real light needs to come from above. However, you still want some light in the box. ”

 

The lighting display cabinet has three “priorities”:

 

First, proper lighting should not cast shadows and should make the product flash.

 

Secondly, when the customer is in front of the showcase or leaning, he or she should not cast a shadow on the product.

 

Third, the heat and color of the light source should be calculated and controlled.

 

Fourth, the best lighting is a combination of lighting types in different locations

 

The color of light changes with temperature. Light warmth is measured in Kelvin (K). Kelvin temperature is defined according to the appearance of the light source (that is, the appearance of the light source itself), and is measured in degrees. Temperatures below 3000 K will produce a “warm” color with a red appearance. From 3400 K to 4500 K, the appearance is white or neutral. Temperatures above 6000 K will produce “cold” light with a blue appearance.

 

There are two options for lighting from above: MR-16 spotlight or PAR30 /PAR-38 bulb.

 

Which method to choose depends on the design environment. If the ceiling above the display cabinet is high, then the PAR38 bulb is the best because it can provide a better and stronger light beam. The ceiling should not be nine feet above the finished floor height to maintain the effectiveness of the lighting. The distance between PAR38 light bulbs should not exceed three feet (from center to center), flood lights are recommended.

Why LED Track Lights are more and more popular ?

The track lighting  is installed on the track, the biggest feature is that the angle of illumination can be adjusted, and the light is concentrated in the key lighting place. The track light was originally used as a lighting for shopping malls, exhibition halls and other places. The gathered light can partially light the display. Later, the track light appeared in the family space, and the decorative effect was unexpectedly harmonious and harmonious.

 

  1. Benefits of using track lights in home improvement

 

LED  Track lights are a type of spotlight. Like spotlights, track lights can also play a role in creating atmosphere and supplementing light. However, spotlights have an obvious disadvantage, especially surface-mounted spotlights and in-line spotlights. These two spotlights need to be installed on the ceiling and cannot be moved. Track lights don’t need to worry about this problem at all. The reason is that there is a hidden electric track inside the track. The position of the track head on the electric track can be adjusted. If the number of lights is not enough or the position is not good, you can add and move at any time.

In the past, track lights were replaced by LED light sources from previous metal halide light sources. In contrast, LED track lights with LED light sources are more environmentally friendly and energy-saving. Now track lights are generally referred to as LED track lights.

 

2, The use of track lights in the family space

 

Some low-rise houses are not suitable for the installation of more complicated and luxurious chandeliers. The ceiling lamps are slightly ordinary and lack personality. The installation of track lights will not cause the above problems. The track lights are simple in shape and have a cold temperament, forming a unique style that can adapt to a variety of decoration styles. As a supplementary light source for the TV background wall, the track light illuminates the wall, and the diffuse reflection generated can reduce the difference in brightness caused by the TV screen and protect the eyesight.

 

Install track lights above the dining table. The concentrated light makes the food look more delicious and appetizing. In addition to the winter sun can bring happiness, there is the warm light on the food.

 

LED track spotlight can also be used as a supplementary light source in the kitchen. In the case of no cabinet ceiling light, the cob track light can be used as a substitute to let the light shine directly on the operation table.

 

Installed in the cloakroom, the soft and bright light shines on the clothing, and the style is instantly improved.

 

The lamp in the bathroom is not installed properly, and it will not be clear because of the backlight when looking in the mirror. Track lights can adjust the illumination angle to meet the lighting needs of all angles. Old and retro toilets, with golden lights, are very emotional and tasteful.

 

Tips: When led track rail light is partially illuminated, such as when it is framed, it is necessary to pay attention to the angle of illumination. The angle is not well-controlled, and the human eyes are easily illuminated by reflected light, causing dizziness.

 

April 2020

Deep UV UVC LED chips used in killing market

Deep UV UVC LED chips used in killing market

 

The new crown pneumonia epidemic is rapidly gaining popularity in disinfection products.

 

The reporter learned from Sanan Optoelectronics  that, as a leading domestic supplier of deep UV LED chips, the company’s deep UV UVC LED chips are widely used in terminal kill products and application scenarios such as disinfection of air, water and surface of objects. Since the outbreak, the company has received a surge in demand from many customers and the government, and the company’s UVC chips have been in full production.

 

It is reported that the company is currently conducting joint tests with relevant domestic scientific research institutions to promote UVC LED epidemic and disinfection products to play a more active role in virus epidemic prevention.

 

UV kill advantage

 

It is currently known that all bacteria, viruses and other microorganisms in the human living environment can be killed by deep doses of deep ultraviolet (UVC) radiation. During the “SARS” period, experts from the Institute of Viral Disease Control and Prevention of the Chinese Center for Disease Control and Prevention found that SARS virus can be killed by irradiating the coronavirus for 30 minutes with ultraviolet light intensity greater than 90 μW / cm2.

 

According to the “Diagnosis and Treatment Scheme for Pneumonitis Infected by New Coronavirus (Trial Fifth Edition)” issued by the National Health and Health Committee on February 5, the new coronavirus is sensitive to ultraviolet rays and heat, and can be effectively destroyed at 56 degrees Celsius for 30 minutes and 75 degrees ethanol Live virus.

 

Some experts point out that the principle of ultraviolet disinfection is to use high-energy ultraviolet light to break the double-stranded DNA of virus DNA, thereby achieving the inactivation of bacteria and viruses. Although in this epidemic, ordinary third-party testing laboratories were not qualified to obtain new coronaviruses for experimental testing, it can be determined that UVC has absolute damage to DNA and RNA (ribonucleic acid), and the virus Belongs to RNA. In practice, the UVC radiation dose to the new coronavirus requires further experiments and practices in cooperation with relevant government departments and scientific research institutions to further clarify.

 

Compared with chemical sterilization, UV has the advantage of high sterilization efficiency. Inactivation is generally completed within a few seconds without generating other chemical pollutants. Because it is easy to operate and suitable for all spaces such as public and home, UV germicidal lamps have become a popular item on major e-commerce platforms. It is also an important sterilization and disinfection equipment in front-line medical and health institutions.

 

Some experts from the Institute of Semiconductors of the Chinese Academy of Sciences pointed out that from the current application, deep UV LEDs are widely used in civil fields such as water purification, air purification, and biological detection. In addition to sterilization, UV light sources also have broad application prospects in many emerging fields such as biochemical detection, sterilization medical treatment, polymer curing and industrial photocatalysis.

 

Or prop up trillions of industries

 

At present, most of the deep ultraviolet light sources used for disinfection and sterilization in civil and industrial fields are mercury lamps. Due to the significant impact of mercury on human society and the environment, from 2020, the international Minamata Convention, which restricts the use and release of mercury, has officially entered into force, and traditional mercury lamps will restrict and ban production and use. And deep ultraviolet LED chips based on third-generation semiconductor materials such as gallium nitride have become the new choice of environmentally friendly and efficient ultraviolet light sources. This all-solid-state light source has a small volume, high efficiency, and long life. Just a chip module the size of a thumb cover, it can emit ultraviolet light that is stronger than a mercury lamp. Experts from the Semiconductor Research Institute of the Chinese Academy of Sciences pointed out that the use of deep ultraviolet LEDs to replace traditional mercury lamps in sterilization applications is similar to the application of white LEDs in the lighting field, which will form a huge emerging industry. It is entirely possible for deep ultraviolet LEDs to develop into a new trillion industry different from LED lighting.

 

In comparison, deep UV LEDs currently have shortcomings in terms of materials and optical power.

 

San’an Optoelectronics introduced to the Securities Times e company reporter, “At present, in terms of materials, mainly relying on foreign countries, the cost is higher, and even the price increases. Many domestic manufacturers believe that the market volume of UVC is not up, and they are unwilling to invest resources in R & D and production , Resulting in fewer suppliers to choose from. ”

 

In terms of optical power, Sanan UVC performance is already internationally equivalent and can reach 2-4% light efficiency. However, for some special alternative markets, there is still a lot of room for performance and cost.

 

Sanan Optoelectronics said, “I believe that with everyone’s emphasis on UVC deep ultraviolet applications, more and more companies will invest in research and production of UVC materials, which will help reduce costs. Sanan Optoelectronics in the UVC extension, Chips and packages continue to increase investment in research and development to ensure cost-effective advantages and open more applications. ”

 

In addition, as an emerging technology, the cost of UVC is currently higher than that of mercury lamps. In this regard, Sanan Optoelectronics believes that over time, improvements in materials, manufacturing, yield, and performance will greatly reduce costs. As in the past 20 years, the cost trend of LED lighting has changed.

 

UVC chips are in full production

 

Looking back, as early as 2014, Sanan Optoelectronics has been the first to invest in UVC deep ultraviolet epitaxy, chip and packaging R & D in China. After several years of cultivation, Sanan Optoelectronics’ deep-UV UVC products in the 260 ~ 280nm band have accumulated customers More than a hundred homes.

 

According to Sanan Optoelectronics, at present, the company’s deep ultraviolet LED has entered the sterilization, water purification and other application markets of first-line home appliance brands, formed strategic cooperation with home appliance brand companies, and completed the design of sterilized UVC LED modules. Based on the continuous breakthrough of Sanan UVC LED in new application fields, the Sanan Optoelectronics team is continuing to research and explore more UV-related emerging application scenarios with international manufacturers and several well-known universities at home and abroad. In addition to general sterilization applications, Sanan Optoelectronics will also expand its applications in plant growth lighting, food preservation after picking, food processing, biological testing, material modification, and marine biological antifouling.

 

It is understood that, because the technology and characteristics of UVC chips are significantly different from ordinary LED chips, they have certain barriers and require independent production lines for production.

 

Currently Sanan Optoelectronics’ UVC chips are in full production, and the market’s competitive advantage comes from its technology accumulation in the field of deep UV UVC LED chips. The reporter combed the public information and found that Sanan Optoelectronics has undertaken tasks related to the national key R & D plan for ultraviolet and deep ultraviolet projects since 2015, and won the second prize of National Science and Technology Progress in the same year.

 

According to the company, the company has developed a variety of sizes of UVC chips and small, medium, large and ultra-high power UVC LED products for known effective sterilization bands. It has successfully passed verification tests and has been introduced to many domestic and foreign well-known brand customers. It has been involved in areas including surface Sterilization, dynamic / static water sterilization and air purification and disinfection equipment. As of 2019, Sanan Optoelectronics’ deep UV UVC products have reached a cumulative output of 1kk and achieved monthly production capacity of more than 1KK.

 

A source from Sanan Optoelectronics said that Sanan will continue to increase investment in technology research and development in UVC related fields. Sanan is optimistic about the future potential of the UVC market, positioning it as an important product and market target for the company’s LED industry in the future. “This epidemic situation may also make people attach great importance to UV and UV LEDs, and especially pay attention to people’s public health and safety, and provide a good opportunity for the development of UV and UV LEDs.”

 

It is reported that since the outbreak, Sanan Optoelectronics has jointly launched an initiative with Guoxing Optoelectronics. It is willing to cooperate with major scientific research institutions and universities in an open attitude to provide UVC LEDs with effective sterilization bands for UV irradiation of new coronaviruses. Bacterial test and research. “We welcome all interested and capable manufacturers to work together to develop more anti-epidemic equipment and solutions.” Sanan Optoelectronics said.

January 2020

How to Buy LED High Bay Lights ?

How to Buy LED High Bay Lights – A Complete Buyer’s Guide 

 

LED lights are proving to be a groundbreaking invention – thanks to their low electricity usage, fast start times and high quality of light. These lights really help consumers save a lot of money on energy expenses and get better light in their homes, business and outdoor areas as well.  Given the daunting chouices however, most people are not sure which light to buy. LED lights come in different sizes, colors and lumens and this makes it difficult to find the right light.   With LED Light Expert, you don’t have to worry at all.  Here we will discuss a complete buyer’s guide that you can use to find the right LED lights for your high bay applications.

 

As the prices of electricity have increased and LED Lights have come down, businesses have started looking for cost-effective and energy saving ways of implementing LEDs.  Replacing old high bay lights with new energy efficient ones is a great start.

 

Why LEDs for High Bay Lights?

 

Before we move into the detail of choosing the right LED lights, it is important to determine why you need to choose LED lights. There are different reasons why you should choose LED bulbs for high bay lights. Some of them are listed below:

 

Cost 

The cost of LED high bay lights and LED light bulbs is very low right now as compared to other bulbs. You can get these bulbs at the same prices as other light bulbs.

 

Energy Saving Option 

As the planet faces energy challenges and it is becoming very difficult to find new and better sources of power that does not ruin the enviroinent. This is the reason why you need to look for options that can play a part in saving energy. LED light bulbs consume less energy and produce more light. Using these lights, you can save a lot of money from those mounting electricity bills.

 

Appearance

Everyone wants to improve the appearance of their home and business. For that reason, they look for different décor items and other design ideas. However, a bright business attracts customers and makes them feel safe. LED lights produce more lumens of light and make your business really shine brighter.

 

Ease 

These lights are very long lasting. You don’t have to change them again and again. At an average, a LED High bay lights lasts for 20 years.

 

Safety 

In LED light bulbs and LED High Bay Lights, there is no UV or mercury used or emitted. As a result, they are very safer to use and operate than other light bulbs.   These lights are an ideal option and safe for health as well.

 

These are a few reasons why you need to choose LED Lights. Let’s now move to the buyer’s guide for LED High Bay Lights.

 

Design a Layout 

When you are looking for a High Bay UFO LED Light, you should have a clear picture in mind of why you need it and where you will be using them. For different places, you would need a different light that would suit the place and meet the requirements. For example:

 

  • Retail Store: If you have a retail store, you need a bright light to attract more customers. At a minimum, you need 800 lux on the ground to illuminate the retail store.
  • Warehouse: In a warehouse, it is important to choose 500 lux so that the work environment for the supervisors could be improved.
  • Storage: In case of storages, a light with 300 lux is more than enough.

 

When you know the requirements, it is time to choose the wattage.

 

Wattage and lumens

High Bay LED lights are available in different watts, but its the lumens you need to keep an eye on.   As LEDs get more efficient they will use less and less watts. You can easily choose one depending on the height where the high bay lights are installed. There are different watts for different levels of height:

 

  • 10-15 feet – This height is ideal for lights with 10,000 to 15,000 lumens.
  • 15-20 feet – This height is ideal for lights with 16,000 to 20,000 lumens.
  • 25-35 feet – For this height, lights with 33,000 lumens are ideal.

 

Spacing 

The spacing between lights is also an important factor in choosing high bay LED High Bay lights. There are three most common cases that you can consider to find the best light for your space. These are listed below:

 

  • At 15 feet height, about 12 feet spacing is essential for a bright light. However, if you need normal light, a space of 15 feet should be present.
  • At 20 feet high you can go to 15 feet spacing for generating bright light and if you need normal light, a spacing of 18 feet should be used.
  • At 30 feet height, you can go for 20 feet spacing between the lights in order to get a brighter light. However, for normal light, you can go for 25 feet spacing.

 

Number of Lights 

After you have determined the spacing between the lights, it is now time to know how many lights you are going to need. The number of lights depends on the available space. Using the spacing and the quality of brightness you need, you can know the number of lights you will be needing for a particular space. You can also create a layout to calculate.

 

Type of Lights

High Bay lights are available in a vareity of shapes.   We offer both round lights, now known as UFO High Bay Lights and longer larger ones knows as LED Linear High Bay Lights.   Most people do not know that round lights spread the lights out just fine if hung a few feet higher up.  Above about 15 feet we always recommend round.  They are easier to install.  In areas with aisles the linear lights become ideal.  At lower heights you can opt for the wide angle style linear high bay lights.

 

How to Calculate Lux? 

Lux is a complicated matter to calculate. You have to make a full CAD plan, (and we do have IES files if needed) however, there are certain simple ways to help you with the calculation without doing Lux.  We can accomplish the goal with other factors the lumens per square foot of the available space as well as height and spacing.  A good number is 2 lumens per cubic foot. If you want bright light, you can go for 3 lumens per cubic foot.

 

Always Get Cross Over Lighting 

In order to get better light, you should have light coming from different directions.  This is called cross over lighting.  Ideally we want it from at least 3 locations. The light coming from opposite sides reduces shadows and evens the lighting. As a result, you get better light that avoids the hot spots of bright light you sometimes see . You may have to plan lower lumen fixtures but more of them for better lighting.

How to Calculate Lux? 

Lux is a complicated matter to calculate. You have to make a full CAD plan, (and we do have IES files if needed) however, there are certain simple ways to help you with the calculation without doing Lux.  We can accomplish the goal with other factors the lumens per square foot of the available space as well as height and spacing.  A good number is 2 lumens per cubic foot. If you want bright light, you can go for 3 lumens per cubic foot.

 

Always Get Cross Over Lighting 

In order to get better light, you should have light coming from different directions.  This is called cross over lighting.  Ideally we want it from at least 3 locations. The light coming from opposite sides reduces shadows and evens the lighting. As a result, you get better light that avoids the hot spots of bright light you sometimes see . You may have to plan lower lumen fixtures but more of them for better lighting.

 

Lumens 

Last but not least, you should always look for lumens, not watts. No matter how much watts you choose, if there are not enough lumens, you will not get better light.

 

 

 

These are some factors you need to consider while choosing a high bat LED light bulb. If you are not sure, you can always contact Awelled and we will guide you further.

 

 

December 2019

LED Track Lighting Supplier Offering Top Class Services

LED Track Lighting Supplier Offering Top Class Services
Lighting has the power to make the place illuminated and an energy too. There are various manufacturers of LED lights in China and some have global presence as well. Several products are manufactured and distributed in the market. Chinese products have found a good standing in the international market as well. LED track lighting supplier can offer products at interesting rates and the customers are happy with the services as well.
What is LED track lighting?
It is a specialized lighting fixture which is fixed overhead like a track and has lights in between. It is mounted on the ceiling or the wall. It is a popular product used in residential and commercial segment as it helps to focus on objects and gives an interesting illumination to the products. The power is run through the track and allows homeowners to highlight the products of their choice. It leaves an impression upon the customers who enter the stores/showrooms.
What are the different types of Track Lighting?
There are three most widely and popularly used tracks across the world. These are termed as H, J, and L track. These names have been given after Halo, Juno, and Lightolier.
Rotating Jewelry Lamp is also one of the most popular products which the commercial stores love to incorporate in their entity. These are used in the showcases and look awesome when lighted and in movement. The products are highlighted, and they appear very interesting. There are high-quality products found in the company which they distribute in the market as well. The products are very popular and have found much appreciation of the users we well. When the product like rotating lamp revolves, the light moves like a trail and the impact is beautiful. The products also look amazing when light is thrown on them.

November 2019

Jewelry Showcase LED Lighting for an Interesting Layout

Jewelry Showcase LED Lighting for an Interesting Layout

Showrooms must keep their showcases lit with proper lights so that the products are properly visible to the window shoppers and passers-by. Showcases also turn out to be the main point of focus in a store. People try to show case their most valued product in the showcase which can attract the attention of the customers and they walk inside the store. Jewelry showcase LED lighting can have an amazing effect and make the product outshine than the rest of the items in the store.

There is no dearth of the best and top-quality display light providers in China. They have a huge collection of LED display lights that they can distribute in the market. Many of these companies are the top manufacturers in the related field for several years and have come forth as reliable partners for their clients. These lights can be easily installed in showcases and cabinets of the stores. The focus of the light can be directed as per the requirement and the spotlight gives an extremely beautiful impact on the product.

The companies are engaged in the production of a wide range of products and they aim to be the top distributors of light products. There are several other manufacturers in the related field, and they provide a tough competition to the competitors as well. They have designed the prices which are highly attractive and unmatched in the market. This is also one of the main reasons behind the success of their entity.

As and when the light is required, it can be adjusted. In the jewelry showroom, the LED lights are quite a success because it gives instant energy to the product as it gets illuminated in the right way. Several jewelry owners feel that the products should be having the right light on the products so that the attention of the customers is easily achieved. Once the customers get a chance to notice the product, they ask for it.

LED cabinet light is also available in the market and it quite a popular product amongst the showroom owners. The product is also very popular in the residential segment. There are various products that the company is offering to the customers at cost-effective products. The products manufactured are all very high in quality. The main aim of the company is to achieve customer satisfaction of the highest level.

The rotating lights are also very popular in the commercial segment as it provides an amazing and striking feel to the products. The customers also get attracted to such products. Light has a different way to attract the attention of the customers. Even the store owners understand this fact and they want to install such lights in their store. Installation is very simple, and the clients can do the same without any professional help also. The website of the company is very attractive, and all the products have been listed with complete product details. This makes the purchase decision of the customers simple and easy. The payment gateways are also secured.

LED Showcase Lights-Display is the Best Way

LED Showcase Lights-Display is the Best Way

 

How many times it happens to us, that we walk into a store where everything is up for display and it looks so amazing every colour gets brightened designs look more intense, and everything lined up neat and bright looks so good. And all these effects on products up for display are done by lighting when LED showcase light or track light are installed in a store it makes the beauty and appeal of every product magnified.

Why LED display lights?

We live in a world that pays a lot of attention to particular product looks, be it watches jewellery, and are or literally anything. We want to buy things that look beautiful and why shouldn’t we.

  • When you will install these LED lights either in your showcase or install some other kind of led display lights according to whatever works for you and your product you will see a drastic increase in your sale of the very product. It has been proven from research that LED showcase lightsor display lights can increase sales up to 40%.
  • These LED display lights are used in all the stores of Jewellery display, watch stores. Art galleries museums, and even an antique store. These lights can be custom made according to your requirement thought they already have so many different kinds of LED display lights available.
  • If you are a jewellery store you can also use jewellery lighting fixturesor LED showcase lights which will make every design of your jewellery look stunning all the details will become more intensified due to lights and it will enhance the true potential of all the hard work that was put into the designs.
  • These lights not just increase the sale of products, the also saves the electricity compared to your other lighting and are good for the environment and if that was not enough, they are sold at absolutely reasonable prices when you will see the profit they will bring.

Led Display Lights-Lighting That Enhances the Beauty of Your Products

Led Display Lights-Lighting That Enhances the Beauty of Your Products

When we put our products for display, be it watch, jewellery or even art for the exhibition the whole purpose of putting things at the display is mesmerizing the consumer or at least fascinate them with the beauty of your product. So, that when they look at it

, they see its potential it’s beauty in the right way that they become eager to have it. And no, that’s not assumption that’s a fact producers put their products for display so that their products look absolutely fascinating and it has been proven from researches that when the Led display lighting was used it increased the sale on an average by 40 %, isn’t that quite fascinating result just by using the right lighting for your products you can increase the sale by approximately 40%. We are here to cover all the answers regarding the led display lights and how to use them for your benefit.

When displayed right, the products can be sold overnight

How your product looks it matters a lot sometimes even more than its quality. So, why not get the right light to display them. There are various kinds of led display lights that you can install, and it will make your product look absolutely glorifying for example-

If you are a jewellery store then you must be putting your jewellery up for display install led downlights in jewellery and up lights in jewellery, which sheds light on all the right part makes it looks detailed and enhances its design, colours and all the edges which the piece of jewellery look like nothing you have seen before.

If you are a brand that sells watches and other products that you have to put up for display you must display them in a way that their colours get enhances their details look meticulous and you present them in a way that it looks appealing to the eye , that could only happen if you install the right display lights  whatever kind of light will suit your store style and display.

Benefits of using led display lights-

  • Led display lights can be custom made according to your requirement, they already cone in different styles led downlights in jewellery, led track lightingand other different kinds of lights used for the display of different products.
  • These lights can increase the sale of your product by 40% on average. Which is a pretty good deal on its own.
  • These lights not just increase the sales they also save the electricity once you install these lights you will see how they can save on electricity up to 80% compare to traditional lights, florescent lights, or even tungsten lights.
  • In today’s world when everything is up for display you must use the right kind and right light for your display so that it just not benefits you but led display lights are also good for the environment.
  • These lights are a must to have for the display of any kind of product they affordable, increases sales saves electricity and saves the environment. So, what are you waiting for get the right kind of display lights for your product?

October 2019

The Benefits of Using COB LED Track Lighting

The Benefits of Using COB LED Track Lighting

Lighting plays a pivotal role in illuminating retail outlets. Different types of light fixtures are used for product illustration and display in such showrooms. Awelled is a manufacturer of LED display lighting products in China and has been able to capture a major chunk of supply in diverse industry verticals. Being the LED track lighting supplier, they have emerged as a top player in the market. The company is one of the most reputed and trustworthy suppliers in the related field.

What is LED track lighting?

The track lighting system is a method of lighting in which the fixtures are assembled in a continuous track device with electrical conductors. It is opposite to the electrical wiring in the individual light units. LED track lighting has become very popular as it allows direct throw of light in the desired area and the results are impressive. This type of lighting is very common in retail outlets and supermarkets too. Various shops and showrooms also install such lighting to showcase their products.

COB LED Track Lighting is also very popular among users. The features of the product are:

  • It has a long shelf life. The functional feature of the light is higher as compared to the traditional lighting systems like halogen, fluorescent, etc.
  • The brightness emitted by the LED light is much superior compared to its counterparts.
  • Installation is also simple.
  • It is eco-friendly and thus is much in demand.

The companies which manufacture such lights have come to the fore. Customer awareness has also gone very high. They too want to use the products which are environmentally safe to use. The LED lighting is energy-efficient and hence is much in demand in recent years. The company aims to attract the attention of the customers and provide them with superior customer satisfaction

September 2019

LED Showcase Lights are in High Demand

LED Showcase Lights are in High Demand

The showcases in the retail outlets look beautiful with the presence of lights. There are various companies which are engaged in the manufacturing of the showcases. Awelled in China is one such name in the related field. They have a massive collection of LED showcase lights and take immense pride to announce the fact that they indulge in the manufacturing of eco-friendly products.

      Advanatges of Awelled LED Jewelry Showe lights

These types of showcase display lights are used in various places and outlets. There are varied benefits of using such lights and few are mentioned below:

  • These LED jewelry showcase lights are energy-efficient. The LED lights act light on our pockets as these can reduce the electricity bills. It is better than the traditional fluorescent, halogen, and incandescent lights. Such options emit light in one direction only unlike the traditional ones which emit heat and light on all directions.
  • It leaves less carbon footprint and hence is highly eco-friendly.
  • LED lights do not burn out over a period of time. The intensity of the light dims out with time and the life of the product are much higher as compared to its counterparts.
  • It is a great option for cool temperature options like refrigerators and works well as lighting required in such products.
  • LED jewelry showcase  lights are durable because these are break-resistant and immune to vibrations.

The jewelry showcase LED lighting is very popular amongst the users. The jewelry showrooms require such lighting because it can provide focus to the area and the entire set-up looks very amazing too.  Such lights are easy to install and are available in a huge variety. The packaging of the LED lights is also apt so that the shipping of the product can be handled with ease. It is a great option for the users and they are always happy to experiment with innovative products

Online Service
Live Chat